NSW Mk3 parts [SYD]

[Speed]

Am chasing down the following parts.

Used:
1. BBS wheel centres
2. Front VR6 badge
3. Front VW badge
4. Tailgate/hatch - prefer burgundy
5. RHR door - prefer burgundy
6. Gearstick handle (Dylan may have me sorted )

New parts I will be purchasing (maybe you never went ahead):
1. Leads
2. Plugs
3. Serpentine belt
4. Windscreen scuttle rubbers
5. PVC valve
6. Breather pipe - from valve to intake (had to ask)
7. Dipstick
8. All 4 brake discs
9. Brake pads.

Not sure on airbags yet...

If you can help me out please either reply here or send me a pm.

Thank you!!!

[Umai Naa!!]

Have tailgate in silver.

May have RHR door in silver as well.

Can get you the leads, plugs, serp belt, and brakes new, if that helps.

Just shoot me a PM, and I'll work out some prices.

[Speed]

Thanks. Have sent you a pm.

My RHR door is not that bad, has pin dents and a deep scratch.

So should have stated that that must be burgundy, otherwise I'll just repair what I have and re paint. Sorry.

[Speed]

So I've finally heard back from my mate who works at VW.

Not only can you not get the Breather hose by itself (same at ECS) but I can't even get a new dipstick or PCV!

Since the VR6 dipstick uses a metal tube as opposed to plastic, I suspect that a 3.2 dipstick won't work?

Have asked Wifey to do a ring around today. Failing that, I might just weld a metal ring on the end and paint it yellow.

[heysie]

ive got a 2nd hand dipstick if you need one

[HaydEn]

I've got.

3.
4.
And airbags.

Bbs centre caps can be had cheap on ebay, as can badges.

Get bkr7e ngk plugs. $2.50 at repco/isp.
$80 ht leads off ebay done well for me.
Run a piece of heater hose ($4 from supercheap) from valve cover to intake pipe. Don't bother about a pvc valve.

[doridori]

I've struggled to find cheap bbs center caps for ages. Seems no one sells the replica 56mm outer 52mm inner bbs caps anymore so if you do find some, please let me know!

[Speed]

I've got.

3.
4.
And airbags.

Bbs centre caps can be had cheap on ebay, as can badges.

Get bkr7e ngk plugs. $2.50 at repco/isp.
$80 ht leads off ebay done well for me.
Run a piece of heater hose ($4 from supercheap) from valve cover to intake pipe. Don't bother about a pvc valve.

Have you had a chance to look for the scuttle rubbers and how much for new serp belt? Think I pm'd you my mobile.

Thanks.

[Speed]

Still chasing down the following :

Tailgate /hatch - prefer burgundy.
RHR door - must be burgundy.
New discs
New pads

[Speed]

Forgot to add this.

Front right guard with rectangular indicator lights (not oval) - prefer burgundy.

So that's 3 panels in total and I may buy the brakes off ebay, just not sure what pads are good for street use, so happy to hear your suggestions.

Thanks