VIC Golf MK1 parts

[Vinda76]

I know some of this is rare in Australia but it doesn’t hurt to ask. Does anyone have any of the following parts gathering dust:

• Idle stabilisation module AKA DIS (251906083 or 171906083) – preferably with both plugs and mounting bracket
• MK1 Golf heater leaf cover, the white cover that goes over the heater in the scuttle tray
• Golf MK1 5 speed gear selector rod, the long one with a plastic foot that goes from the gear lever to the engine compartment
• Genuine RH front wing (rust free)
• Genuine slam panel (rust free)
• ‘6 stud exhaust manifold’ (not the c clip type) heat shield and mounting brackets

Cheers Gav

[roccodingo]

I can do the leaf cover for you Gavin, ther digital idle stabiliser ( DIS ) is available from VWclassic parts, you can also use the same unit from a watercooled caravelle.

Gear selector rod is same as the 4 speed one from memory, I will check etka and confirm that for you.

Prob got a 6 stud exhaust manifold also, you want a std one or the GTI version ( larger holes, larger studs and wider spacing) ?
For a better mod you can use a MK3 exhaust manifold and the TT downpipe that is made for this conversion, I have one on Val's cabrio and it all the ducks nuts..

[roccodingo]

Selector rod is the same mate .

[Peter Jones]

All the GLDs have the 6 stud manifold and down pipe Gav. Just need to find a diesel car to pull it off.

You need to specify early or late wing too, there's subtle differences in the pressing.

I've got a 4 speed selector rod and maybe a wing here.

[Vinda76]

Thanks for the replies.
Sorry for the confusion, I'm after the heatshield for the downpipe - GTI manifold/dp. Didn't realise that there were two kinds of 6 stud manifold/dp - explains why the bracket I have doesn't fit.
Car is an S2 so late model for the wing.
PMs sent re selector rod and heater cover.
Cheers Gav