If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed, registering will remove the in post advertisements. To start viewing messages,
select the forum that you want to visit from the selection below.
This means you should apply for your renewal now to avoid any disruptions to your membership whilst the renewal process is taking place! NOTE: If you have an auto renewing subscription this will happen automatically.
Above Forum Ad
Collapse
Announcement
Collapse
No announcement yet.
Wanted to Buy or Borrow: Specialty Double 21 & 22 mm Strut Nut Socket
Failing that what i did was brought a 21/22mm nut to fit over the strut then grinded down the sides to fit a 1inch spanner on it and put the 10mm or Allen key down the middle of the socket.
sigpic 2001 Turbo! 4mo Bora 'Boring' | Carbinaro CAI | Fixing broken stuff | Sorting the Turbo Goodness! | BBS Lm's 18x8.5 | KW V2's | 4 pot Brembo's
Yeah, I thought about that too but I have a complex about hacking up shiny new sockets and spanners I'd just use an adjustable spanner on it so it doesn't need to be ground too accurately.
By the way, did you get a normal socket or one of the long reach/deep sockets?
Yeah, I thought about that too but I have a complex about hacking up shiny new sockets and spanners I'd just use an adjustable spanner on it so it doesn't need to be ground too accurately.
By the way, did you get a normal socket or one of the long reach/deep sockets?
Haha don't worry i did as well but it had to be done to have my car back. This wasn't either it was just ground till we could get it on. Just used a normal 3/4? inch socket. Bigger the bit the better the hole is in the middle. I got away with a spark plug socket for the Allen key though but the kw's need a 10mm socket hence this one.
sigpic 2001 Turbo! 4mo Bora 'Boring' | Carbinaro CAI | Fixing broken stuff | Sorting the Turbo Goodness! | BBS Lm's 18x8.5 | KW V2's | 4 pot Brembo's
Good tip on the size of the drive... By the way, did you use an impact socket or a normal socket to modify?
Cheers for the info so far. I guess I'll just head to supercheap and find the cheapest one I can
Just a normal socket. Cheaper the better in this case.
If this is to remove your stock ones i would try and find a 13/16ths spark plug socket, I used my kincrome one as it has hex on the outside so no grinding. But if your changing to kw's they will be 22mm instead of 21mm
my effort
sigpic 2001 Turbo! 4mo Bora 'Boring' | Carbinaro CAI | Fixing broken stuff | Sorting the Turbo Goodness! | BBS Lm's 18x8.5 | KW V2's | 4 pot Brembo's
Comment