QLD WTB : Polo 6n rear stub axle and hub?

[KI11Z]

Heya!

I have a side project going on with my rear brakes at the moment and am in need of the left and right hand side stub axles and hubs from the 6n Polo??

Any help would be MUCHLY appreciated


Part numbers for reference:

lhs stub - 6n0501117
rhs stub - 6n0501118
hubs - 6q0598611



. . . . . Alex

[Oli]

hi champ
ask Matt, hes got something.
Cheers
Oli

[Golf Loon]

What year model polo?
They change.
Early ones are drums and same as SEAT
The 98-02 Model has the hub and bearing complete as a bolt on unit.
The part number i have is 6x0 501 477.
Brand New $80 each.
That is the hub and bearing complete and should fit onto your VR6 Stub axle.

[Oli]

I think he wants late polo 2006 on- 5X100,

[Tim]

the hub part number is from a 9N/9N3 not a 6N. Soo yeah current shape and the pre facelift model most likely

[KI11Z]

the hub part number is from a 9N/9N3 not a 6N. Soo yeah current shape and the pre facelift model most likely

I think he wants late polo 2006 on- 5X100,

correct guys

This thread is because I want to upgrade the disc size and thickness and also want to be able to change out the disc without having to replace the bearings everytime.

I found this diy, however I'd need the later 5x100 hub and then just use maybe some front discs of the vr6. This sounds feasable right? i've done vage research

I think the below is what I need:

l-stub-6n0501117
r-stub-6n0501118
2 x hubs-6q0598611
and either the early(280mm) or later(288mm) vr6 discs.