NSW 9N3 Polo GTI 1.8T parts

[Grant]

Looking at used options for the following parts before I go ordering new parts off the internet. Needs to fit a Polo 1.8T.

- [s]FMIC kit [/s]
- TIP
- K04 turbo or other bolt on upgrade.

Cheers
Grant

Sent from my LM-Q610.FG using Tapatalk

[h100vw]

You could do to be a bit more specific on the turbo you want.
The TIP needs to match the turbo.

A K04 would require additional hardware on top of the turbo itself. Injectors and MAF housing.
It's been a long while since I saw a front mount for sale. Have a look at airtec, seat sport or maybe well vooler. You will need to get pipework made to suit.

[Grant]

You could do to be a bit more specific on the turbo you want.
The TIP needs to match the turbo.

A K04 would require additional hardware on top of the turbo itself. Injectors and MAF housing.
It's been a long while since I saw a front mount for sale. Have a look at airtec, seat sport or maybe well vooler. You will need to get pipework made to suit.

I've been looking at the airtec kit but it's over $1k delivered so I'm testing the waters here to see if there are any 2nd hand kits available... Same with the darkside/seat sport option.

My goal here is to finally go stage 2 (I have a downpipe already fitted) but I figured if I could get a direct swap k04 at a good price (like in the APR kit) I could do it all at once and get a single tune. Would a forge TIP fit the direct swap k04?

Sent from my LM-Q610.FG using Tapatalk

[Schalke04]

Looking at used options for the following parts before I go ordering new parts off the internet. Needs to fit a Polo 1.8T.

- FMIC kit
- TIP
- K04 turbo or other bolt on upgrade.

Cheers
Grant

Sent from my LM-Q610.FG using Tapatalk

I can do a ball hybrid k03, similar sized to a gtx2860 gen 2 or a journal bearing hybrid k03, that’s larger than a k04 but direct for

[Grant]

I can do a ball hybrid k03, similar sized to a gtx2860 gen 2 or a journal bearing hybrid k03, that’s larger than a k04 but direct for

Any further details on a ball hybrid k03? I've been looking at beach buggy turbos K300.

Just bit the bullet and ordered a airtec fmic kit.

Sent from my SM-T815Y using Tapatalk

[sambb]

yeah go the BB hybrid K03!! Then you can give me a report on it.

[Schalke04]

Any further details on a ball hybrid k03? I've been looking at beach buggy turbos K300.

Just bit the bullet and ordered a airtec fmic kit.

Sent from my SM-T815Y using Tapatalk

Let me know what details you’re after and I’ll fill you in.

It’s dual ceramic ball bearing, should do over 300hp comfortably and likely closer to 350+hp. It’ll be extremely good with longevity, especially with increase boost levels

[vwthunder]

h100vw can give a report on the BBT K300, i have driven his BBT turbo'd polo, pretty sure its the K300 , goes hard

[h100vw]

https://www.picclickimg.com/d/l400/pict/183597788551_/Pression-turbo-VDO-mecanique-Vision-o-52.jpg

I have this gauge in my Polo, it will swing past the V in VDO with no problems.