Tweet
BBS Super RS 18” with Tyres ($2,000) Negotiable - SOLD
Genuine BBS Super RS - 2 Piece forged aluminium wheels with tyres
Specs:
Front: 18 x 8 ET35 with 1.5” Lip
Rear: 18 x 9 ET37 with 1.5” Lip
Professionally filled and redrilled from 5x114.3 to 5x100 bolt pattern
Centre Bore is 66.1mm – will need hub rings for 57.1mm cars
Wheels are 100% straight, no buckles, cracks, small amount of gutter rash (see photos), overall good condition
1 Centre cap has a crack over the logo as shown, the logo is still secure inside the caps and one other has a slight crack. The other 2 caps are perfect.
Comes with genuine BBS cap removal tool.
The lips have been refurbished.
Fitted with Nankang NSII 225/40/R18 Tyres which have been swapped over and re-balanced.
Front thread – 6mm
Rear thread – 4mm
Both have slightly more wear on the outer edges as seen in the photos
You’ll need tuner type bolts to run these, I would have thrown this in but I’m using them on my Futuras.
Front
Rear, bit of stretch
On the car, no spacers
215/40/R17 Goodride Tyres ($250) Negotiable - SOLD
90% thread, measured 7mm across all 4 tyres (new tyres are 8mm)
Done under 5000km, very good condition
Photos show stretch on 17x9 wheels
H&R 10mm Spacers with bolts ($120) - SOLD
5x100/5x112 Spacers with longer bolts, made to fit OEM wheels
Custom made 20mm Adapters 5x100 to 5x100 ($100) - SOLD
Fit 57.1mm hub and 73mm centre bore wheels
Prefer pickup from Eastern Suburbs
Can organise shipping interstate at buyers expense
Genuine BBS Super RS - 2 Piece forged aluminium wheels with tyres
Specs:
Front: 18 x 8 ET35 with 1.5” Lip
Rear: 18 x 9 ET37 with 1.5” Lip
Professionally filled and redrilled from 5x114.3 to 5x100 bolt pattern
Centre Bore is 66.1mm – will need hub rings for 57.1mm cars
Wheels are 100% straight, no buckles, cracks, small amount of gutter rash (see photos), overall good condition
1 Centre cap has a crack over the logo as shown, the logo is still secure inside the caps and one other has a slight crack. The other 2 caps are perfect.
Comes with genuine BBS cap removal tool.
The lips have been refurbished.
Fitted with Nankang NSII 225/40/R18 Tyres which have been swapped over and re-balanced.
Front thread – 6mm
Rear thread – 4mm
Both have slightly more wear on the outer edges as seen in the photos
You’ll need tuner type bolts to run these, I would have thrown this in but I’m using them on my Futuras.
Front
Rear, bit of stretch
On the car, no spacers
215/40/R17 Goodride Tyres ($250) Negotiable - SOLD
90% thread, measured 7mm across all 4 tyres (new tyres are 8mm)
Done under 5000km, very good condition
Photos show stretch on 17x9 wheels
H&R 10mm Spacers with bolts ($120) - SOLD
5x100/5x112 Spacers with longer bolts, made to fit OEM wheels
Custom made 20mm Adapters 5x100 to 5x100 ($100) - SOLD
Fit 57.1mm hub and 73mm centre bore wheels
Prefer pickup from Eastern Suburbs
Can organise shipping interstate at buyers expense
Comment