Tweet
I'm selling my old 82 cabrio, Black with a tan roof
Started a business, bought a hilux and i havent used it in 7 years and someone else can have some fun with it.
It has alot of bells and whistles on it.
rebuilt Kr 16v 1.8lt engine set up with kjetronic and a 5 speed with the correct linkages
Diesel tank
Front ventilated discs and rear discs with willwood bias valves
15 x 7 inch alloys
Late model mk1 interior, Front grill and the factory clipper kit
The intake is polished but not sure how good it looks now
Kenwood stereo with amps etc etc
Hi range tacho
16v badge
front and rear sway bars
Momo wheel and boss
It had a new paint job 7 years ago inside and out.
I'm suehere is a whole heapo thingsi'vefrgoten o mention but its been a while since i've played around with the car.
Basically i rebuilt the thing from scratch and have the pics somewhere.
What it needs:
It needs a new electronic advance module for the distrubutor but its currently running on the standard module that runs the 1.8 8v.
Works but not advancing the motor as you rev up.
As all mk1's it has an eletrical issue to the coil. so you'll have to run a new wire to the coil from the fuse box.
The roof has been slashed but can probably be pacthed up as it was also replaced in the rebuild.
Its sitting at work andI have to move it in a couple of weeks month so if you want let me know otherwise its going into storage at the old mans place.
I also have a truck load of parts including an 1.6 with injected head, and a 1.8 and all sorts of bits
I'll put some pick up soon or text me if you want me to sms you some picks.
If you're keen i'll fire it up for you.
$3000
Ray 0404 495 440
Started a business, bought a hilux and i havent used it in 7 years and someone else can have some fun with it.
It has alot of bells and whistles on it.
rebuilt Kr 16v 1.8lt engine set up with kjetronic and a 5 speed with the correct linkages
Diesel tank
Front ventilated discs and rear discs with willwood bias valves
15 x 7 inch alloys
Late model mk1 interior, Front grill and the factory clipper kit
The intake is polished but not sure how good it looks now
Kenwood stereo with amps etc etc
Hi range tacho
16v badge
front and rear sway bars
Momo wheel and boss
It had a new paint job 7 years ago inside and out.
I'm suehere is a whole heapo thingsi'vefrgoten o mention but its been a while since i've played around with the car.
Basically i rebuilt the thing from scratch and have the pics somewhere.
What it needs:
It needs a new electronic advance module for the distrubutor but its currently running on the standard module that runs the 1.8 8v.
Works but not advancing the motor as you rev up.
As all mk1's it has an eletrical issue to the coil. so you'll have to run a new wire to the coil from the fuse box.
The roof has been slashed but can probably be pacthed up as it was also replaced in the rebuild.
Its sitting at work andI have to move it in a couple of weeks month so if you want let me know otherwise its going into storage at the old mans place.
I also have a truck load of parts including an 1.6 with injected head, and a 1.8 and all sorts of bits
I'll put some pick up soon or text me if you want me to sms you some picks.
If you're keen i'll fire it up for you.
$3000
Ray 0404 495 440
Comment