Hi guys,

Long shot but im chasing a 1.8T 20V for a conversion im working on, preferably an AEB. Only interested in the 058 blocks [B5 A4/Passat] as the later engines oil pump arrangement interfere with the crossmember. I dont care if it runs or it doesnt, as long as its complete and doesnt...

Hi,
Hoping I'm in the right section. I'm after a 1.8 20V naturally aspirated, ADR engine designation, inlet manifold.
Should look like this complete:

what I'm really after is this part off the base of it:

If anyone has one that they can sell, please let me know....

some new things added

- K03s modified compressor housing. Muffler deleted and straight piped to resemble K04-001 housing
- K03s modified exhaust housing. Opening to wastegate runner unshrouded and port cleaned up leading to the wastegate flapper. ceramic coated too. Both ideal for...

Ive fitted the 1.8T 20V BJX in my Polo with Cat Cams adjustable cam timing pulley. The engine is internally stock and is broadly in stage 2 guise as far as hardware goes. I'm going to experiment with advancing the cam timing and was hoping to hear from people who have done the same - I'm curious to...

Hi,

I recently did a hydraulic to mechanical tensioner conversion on my 1.8T 20V in a Polo Gti 9N3. The tensioner I used is the KR series 1.8L 16V one. I'm getting a whistle noise when I get up it. If I progressively bring up the revs even to say 5000rpm its fine but If I accelerate hard...

Hi all,

Selling this INA sump for 1.8T 20V transverse engines: INA 1.8T Baffled Oil Pan - PG Performance

Is in as new condition/never fitted/un tainted. Replaced some un plated bolts that hold its top cover down with some stainless ones. The workmanship/welds are a work of...

Camshaft Belt Tensioner (16V, '86-'9 [109 056] - $35.00 : Techtonics Tuning, VW and Audi Performance Tuning and Repair Parts

I'm after one of these with the 10-8mm stud/washer/nut so that I can convert to manual tensioner on my BJX 1.8T 20V. If anyone knows where to source these domestically...

urgently need one for a 1.8T 20V BJX. any help in sourcing one massively appreciated.

thanks
sam

Surely out of all you mk3 guys somebody must Know if a later model 20v head will bolt onto the 2.0l block, I understand there will be mods needed, but can it be done??
I have an AGG code motor and would love to convert it to 16 valve, but in OZ 20v gear is much more common, can it be done? or...

Hi guys,

Looking for some recomendations/info on people or companies in WA who could help me out with a 20vt engine conversion.

I have a 1990 Golf clipper that is currently having the roof replaced and a respray but the engine is next!

Any info regarding parts...

http://www.vwwatercooled.com/forums/...6-a-63247.html

Not engineered but all work done, sold with alloys with no tyres and steels with tyres.

7000

PM for more info.

Thanks...