Tweet
If you cant get from under engine bay on forums people say to remove grill, front bumpser etc.
Well whilst cleaning under my guard liners I found an easier way.
Jack up
Make safe
Remove front wheel
Remove star screws
Remove/roll back front guard liner
Access to oem HID
Made changing mine out easy.
I had tried from the top but just couldnt get the replacements to sit in (orig bulbs had started to loose output due to clouding on glass)
Even from here bulbs were tight so I gently filed down the 3 little pips on the mounting face as the replacements were .2mm thicker.
Square cut out goes to top
Bazzle
Well whilst cleaning under my guard liners I found an easier way.
Jack up
Make safe
Remove front wheel
Remove star screws
Remove/roll back front guard liner
Access to oem HID
Made changing mine out easy.
I had tried from the top but just couldnt get the replacements to sit in (orig bulbs had started to loose output due to clouding on glass)
Even from here bulbs were tight so I gently filed down the 3 little pips on the mounting face as the replacements were .2mm thicker.
Square cut out goes to top
Bazzle